The Bodine Company designs and manufactures innovative, award-winning emergency and specialty lighting products. The majority of Bodine products fall into the category of life safety. These products help ensure the well being of building occupants in the event of a power failure by providing backup/emergency lighting that will allow occupants to carry on as normal until normal power is restored or to safely evacuate, depending upon the situation.

Just as lives depend upon quality healthcare, lives depend upon quality emergency lighting. There is no room for compromise in life safety. All Bodine products are designed, built and tested to the highest standards. The company’s excellent standing in the lighting and life safety industries attests to Bodine’s success as a quality manufacturer. 

	Product Families
	ARC Keeper® The ARC Keeper® catches and maintains an HID metal halide lamp arc during AC power sags, interruptions or failures that would otherwise be problematic for the lamp. The ARC Keeper supports the arc for up to 2 minutes – or until normal or generator power is in place. Models for pulse-start and probe-start lamps are available. More >>
	B33 Fluorescent Emergency Ballast The B33 provides high-lumen (2700-3400 lm) emergency lighting. It operates two or three lamps in emergency mode for a minimum of 90 minutes. More >>
	Cold-Pak® Extended-Temperature Fluorescent Emergency Ballasts Cold-Pak® emergency ballasts provide emergency lighting in environments with temperatures ranging from -20° C to +55° C (-4° F to +131° F).They are suitable for use in damp locations. Linear and compact models are available. More >>
	Extended Run-Time Fluorescent Emergency Ballasts Extended run-time products offer two- and four-hour emergency illumination. They are ideal for hospitals and other healthcare settings in which occupants may require extra time for evacuation. More >>
	GEN™ Series Fluorescent Backup Ballasts GEN™ Series products provide high-lumen interim illumination to fill the gap between normal power loss and generator startup. It can take generators as long as 10 seconds to bring on backup lighting. 10 seconds in the dark can seem like a lifetime, especially in a critical care situation. More >>
	GTD™ Family The GTD™, GTD20™ & GTD20A™ help save energy by eliminating reliance on night-light circuits for emergency lighting and allowing emergency lighting to operate on switched circuitry. More >>
	RCT™ Remote Control Testing Fluorescent Emergency Ballasts Bodine's RCT™ ballasts allow end-users to test emergency lighting from up to 32 feet away. No ladders or extension devices are needed. More >>
	REDiTEST® Self-Testing/Self-Diagnostic Fluorescent Emergency Ballasts REDiTEST® products automatically test emergency lighting on a monthly (30 seconds) and annual (90 minutes) basis in accordance with emergency lighting code. More >>
	CheckMate™ ET1 The CheckMate™ ET1 allows remote control testing of existing exit signs and wall packs. As with our RCT™ fluorescent emergency ballasts and retrofit modules, users simply POINT, CLICK and TEST operation from up to 32 feet away (line-of-sight). Climbing on ladders to reach test switches in busy corridors is unnecessary. The easy-to-install device was designed for the retrofit market. More >>